Seite - III - in 3D Printing of Metals
Bild der Seite - III -
Text der Seite - III -
iii
Table of Contents
About the Special Issue Editor ..................................................................................................................... v
Preface to “3D Printing of Metals” .............................................................................................................. vii
Manoj Gupta
3D Printing of Metals
Reprinted from: Metals 2017, 7(10), 403; doi: 10.3390/met7100403 ......................................................... 1
Vyasaraj Manakari, Gururaj Parande and Manoj Gupta
Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review
Reprinted from: Metals 2017, 7(1), 2; doi: 10.3390/met7010002 ............................................................... 3
Wei Quan Toh, Pan Wang, Xipeng Tan, Mui Ling Sharon Nai, Erjia Liu and Shu Beng Tor
Microstructure and Wear Properties of Electron Beam Melted Ti-6Al-4V Parts: A Comparison
Study against As-Cast Form
Reprinted from: Metals 2016, 6(11), 284; doi: 10.3390/met6110284 ......................................................... 39
Volker Weißmann, Philipp Drescher, Rainer Bader, Hermann Seitz, Harald Hansmann
and Nico Laufer
Comparison of Single Ti6Al4V Struts Made Using Selective Laser Melting and Electron
Beam Melting Subject to Part Orientation
Reprinted from: Metals 2017, 7(3), 91; doi: 10.3390/met7030091 ............................................................. 52
Riccardo Casati, Jannis N. Lemke, Ausonio Tuissi and Maurizio Vedani
Aging Behaviour and Mechanical Performance of 18-Ni 300 Steel Processed by
Selective Laser Melting
Reprinted from: Metals 2016, 6(9), 218; doi: 10.3390/met6090218 ........................................................... 74
Li Tang, Chunbing Wu, Zhixiong Zhang, Jianzhong Shang and Chao Yan
A Lightweight Structure Redesign Method Based on Selective Laser Melting
Reprinted from: Metals 2016, 6(11), 280; doi: 10.3390/met6110280 ......................................................... 87
Lianfeng Wang, Jiubin Jue, Mujian Xia, Lijie Guo, Biao Yan and Dongdong Gu
Effect of the Thermodynamic Behavior of Selective Laser Melting on the Formation of
In situ Oxide Dispersion-Strengthened Aluminum-Based Composites
Reprinted from: Metals 2016, 6(11), 286; doi: 10.3390/met6110286 ......................................................... 108
Shahir Mohd Yusuf, Yifei Chen, Richard Boardman, Shoufeng Yang and Nong Gao
Investigation on Porosity and Microhardness of 316L Stainless Steel Fabricated by Selective
Laser Melting
Reprinted from: Metals 2017, 7(2), 64; doi: 10.3390/met7020064 ............................................................. 119
Markus Bambach, Alexander Sviridov, Andreas Weisheit and
Johannes Henrich Schleifenbaum
Case Studies on Local Reinforcement of Sheet Metal Components by Laser
Additive Manufacturing
Reprinted from: Metals 2017, 7(4), 113; doi: 10.3390/met7040113 ........................................................... 131
zurück zum
Buch 3D Printing of Metals"
3D Printing of Metals
- Titel
- 3D Printing of Metals
- Autor
- Manoj Gupta
- Herausgeber
- MDPI
- Ort
- Basel
- Datum
- 2017
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-03842-592-2
- Abmessungen
- 17.0 x 24.4 cm
- Seiten
- 170
- Schlagwörter
- 3D printing, additive manufacturing, electron beam melting, selective laser melting, laser metal deposition, aluminum, titanium, magnesium, composites
- Kategorien
- Naturwissenschaften Chemie