Seite - 1568 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1568 -
Text der Seite - 1568 -
Fig. 3
Flow regime in the contraction section
3.2. NAPPE FORMS
The flow separated into three parts after it left the edge of the STED, i.e.
nappe, fin, and water wing. Among these parts, the nappe was formed by the
longitudinally extended main flow; the fin was a very thin nappe moved
downstream along a straight line trajectory, formed by the flow beneath the main
flow under high pressure, which contained negligible quantity of discharge and
might hardly cause damage to the buildings; the water wing was caused by the
collision of the shock waves, might bring about harmfulness to the stability of the
bank and the safety of the buildings downstream.
4. SHOCK WAVES
The shape of the shock wave is the key factor that affects the operation of
STED. Ippen proposed the basic formula of shock wave (Eq.1), based on static
water pressure assumption.
2 2
1 1
1 1
sin 1
2 h h
β
Fr h h (1)
Where, β is the angle of the shock wave, h1 and h2 are the depth upstream
and downstream of the shock wave respectively; Fr is the Froude number of the
incoming flow.
Ippen’s formula was then simplified by Hager et al. (1994) and Liu et al.
(1999) According to Ippen’s theory, there are also two formulas,
1
2 tg
tg
h φ
h β (2)
Hence,
1568
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik