Seite - 1572 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1572 -
Text der Seite - 1572 -
Where, vC, γ, and hC are the velocity, the angle of departure, and the depth
at the shock waves collision point C respectively; g is the gravitational acceleration.
Therefore, the value of vC, hC, and γ need to be determined.
The value of vC could be calculated based on Ippen’s theory. The velocity
after the shock wave was determined by the angle of the shock wave.
C cosβ
v v
cos β θ (17)
Where, v is the velocity of the incoming flow before the shock waves.
The depth at the shock waves collision point could be got from continuity
equation,
C C
CvhB
v h B (18)
Where, BC is the width of the contraction section at the shock waves collision
point.
Then,
1
C
C C h cos β
θvhB
h
v B cosβ tanθ cotβ (19)
According to the experimental results (as demonstrated in Figure 6), the
water surface along the central line could be approximately expressed as the
shape of a parabolic function,
2y
px h (20)
Fig. 6
Water surface along the central line for various conditions
As defined above, the coordinate of the collision point C was (LOC , hC ). So
1572
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik