Seite - 1592 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1592 -
Text der Seite - 1592 -
The unqualified mechanical and electrical components are the prior source
of errors and inconsistency of data respectively. Each mechanical component of
an instrument as well as electrical components is involved in the final precision.
The assembly of cells and the insert in an appropriate housing are all-over
important. A thigh housing with one-tenth millimeter tolerance or a slim housing
prone to the deformation can reduce the precision tens of percent. In a similar
manner the electrical components are enough sensitive to cause the errors.
1.2. SOURCE OF ERRORS; HOW HELPFUL THE CONVENTIONAL SOLUTIONS ARE?
There are some methods, which try to overcome these uncertainties either
by some technical considerations during manufacturing, installation or by some
recalculating of measured stress values.
First, some special changes in material and configurations of sensors, e.g.
reducing drift and creep effects, the heavy-duty housings for inserts, short length
hydraulic oil tubes, circular ventilation oil filling, grooving the loading pads, etc.
would be listing as important achievements of manufacturers for overcoming the
technological sources of errors (Fig. 6). However, they do not definitely warrant an
on-site consistent measurement of total pressure.
Fig. 6. Total Pressure Cell, Some sources of manufacturing errors
Second, the technical considerations during installation on site for
positioning, installation, material filling and compaction don’t guarantee in any case
a steady fixed direction of installed pressure cells. These methods generally try to
make a same compaction conditions around the total pressure cell for preventing
local rotation and short-term local arch-action.
On the other hand, the theoretic recalculations are based on many
assumptions. There are some methods, which are a combination of both practical
and theoretical methods for reducing the negative physical effects and increasing
the accuracy of theoretical calculations. These methods have certainly some
limitations and disadvantages.
The conventional theoretical solutions, applicable considerations for
installation and technological achievements of manufacturers are generally limited
to the mechanical aspects of instrument and don’t present any solution for
overcoming the measuring errors due to the long-term rotation. Consequently, the
1592
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik