Seite - 1594 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1594 -
Text der Seite - 1594 -
As a combination of practical and theoretical method, the installation of a
cluster of cells makes the recalculation of the rotation possible. In this method, the
pressure cells are installed with maximum possible compaction ratio and minimum
disturbance of surrounding fill in a cluster form up to five directions. In figure 8, the
arrangement of embedded total pressure cells in a cluster of five cells is shown.
Fig. 8. The angles of embedded total pressure cells in a cluster of five cells.
Since the total pressure cells in one cluster are close enough to each other
and adjust equally with the soil mass deformation quite all of them, an equal
change of installation angle – the rotation - of whole pressure cells is expectable.
Therefore, they can be considered as stresses in different directions for a single
point in the embankment. The evaluation of stress ratio (normal stress to lateral
stress; σmax and σmin) and the angel of pressure cushions (θ) is possible by theoretic
recalculating of pressure data. For this reason, the Plain Strain formulation of
strength of materials is used (fig. 9).
Fig. 9. The normal stresses on the rotated element recorded by the cell
embedded 45°
With knowledge of stress ratios form the installed pressure cells and using
the pole method of Mohr circle, finding the direction of pressure cushion is possible.
Any straight line drawn from the pole will intersect the Mohr circle at a point that
represents the state of stress on a plane inclined at the same orientation (parallel)
in space as that line (figure 10).
1594
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik