Seite - 1613 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1613 -
Text der Seite - 1613 -
last few years that certain “lessons learned” during the revolution have not been
fully or correctly applied, or have indeed been ignored. If left unchecked, these
regressions will have the effect of reducing the quality and reliability of the
finished product, and will increase the prospects of contractual disputes.
The following topics focus on practical issues associated with the execution
of the works, and so exclude reference to design-related issues such as the
number and spacing of grout lines; drill hole spacing and orientation; upstage
versus downstage; or grouting control principles.
2. LESSONS LEARNED
2.1. DRILLING TECHNIQUES FOR OVERBURDEN AND ROCK
Most remedial grouting projects will involve drilling and casing through
overburden and/or embankment fill so that standpipes can be placed to permit
safe access to the rock drilling activities therebelow. In essence, neither
compressed air nor water is considered acceptable for fear of compromising the
integrity or safety of the embankment [7]. This explains the widespread use of
the rotary vibratory method (“sonic drilling”) and dry, double-head duplex, wherein
an inner auger is advanced simultaneously with the outer casing. In both cases,
minimal amounts of water are introduced to facilitate progress. Every care
should be taken to prevent “cleaning water” used on the working platform from
escaping down and around the casing (or standpipe once it has been installed).
It is one of the oldest debates in the drilling and grouting industry:
percussion versus rotary methods and air flush versus water flush. Past practice
has been dictated by the capabilities of the drilling industry: given that air flush is
not permissible for rock fissure grouting, or when drilling in karstic limestone
formations under existing embankments, much traditional work was done by
rotary drilling, either coring or “blind,” using water flush.
Rotary percussion drilling, especially of the Down-the-Hole (DTH) variety,
has distinct advantages over rotary drilling in terms of speed and deviation
control, but was always synonymous with the use of air flush. The practice of
some contractors to “mist” the air with water is totally misguided, as this actually
reduces the chances of drilling a clean hole, not improves them. The best of all
worlds arrived in 1995 in the form of the water activated (and flushed) DTH
(WDTH) [8]. This tool has been the staple of the better resourced grouting
contractors since it was first successfully demonstrated at the McCook Quarry
Trial (Chicago, IL) in 2001 and consistently provides high quality holes for
grouting.
1613
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik