Seite - 1638 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1638 -
Text der Seite - 1638 -
Downstream (Constant Head)
BoundaryCondition
172 m
Max. WaterLevel
195.20 masl Upstream(Constant Head)
BoundaryCondition SeepageExit
0,0
influencing the seepage conditions within the dam. This approach results in a
model width of 172 m. The modelled underground depth was selected also with a
minimum of two times the dam height. The maximum water level is applied at
195.20 m a.s.l. which is 8.7 m above the upstream ground surface level. The
geological formation consisting of a clay layer, sand-gravel, and London clay
layers are integrated in the model. The thicknesses are established as 6 m, 7 m,
and 7 m for clay layer, sand-gravel and London clay, respectively. The thickness
and depth of the cut-off wall are applied with 60 cm and up to 13 m respectively.
The thickness and depth of gravel columns are assumed as 80 cm and 9 m
respectively. The distance between the gravel columns is assumed as 2 m
(center to center) so that in total 33 gravel columns are considered in the model
section. For a better possibility of evaluation the reference coordinate system
used the origin (x, y) = (0, 0) at the upstream dam toe. The final view of the
numerical model that used in seepage analysis is given in Fig. 2.
To determine the seepage flow – steady state conditions were considered –
through the embankment body, a FEM requires the definition of boundary
conditions. Three hydraulic boundary conditions are applied for the numerical
model as follows:
‘Constant head’ Upstream face at a height of 195.20 masl (water
level with 8.7 m above the terrain surface) dark blue in Fig. 2
‘Constant head’ Downstream face the maximum water level that is
at a height of -0.44 m blue downstream line in Fig. 2
‘Seepage exit’, ‘Total flux type’ Potential seepage exit areas along the
downstream slope the ground water flow as 0 m3/s red line in Fig. 2
Fig. 2
Finite element model for the seepage analysis
1638
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik