Seite - 1639 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1639 -
Text der Seite - 1639 -
No Type Name Color of
Zone in
Model Permeability
kS
[m/s] Anisotropy
A=ky/kx
[-] Saturated
Volumetric
Water
Content [-] Unit
Weight
g
[kN/m³] Cohesion
c'
[kPa] Friction
Angle j'
[°]
1 Cohesive Soil Buttress 10
-9 0.5 0.325 19 4 31.0
2 Sand-Gravel 10
-3 0.5 0.225 17 0 37.5
3 Protection Layer (Up) 10
-3 0.5 0.200 17 7 31.0
4 Geomembrane Clay liner 10
-7 0.5 0.400 20 4 25.0
5 Drainage / Gravel 10
-2 1 0.195 18 0 35.0
6 Cut-off Wall 10
-9 1 0.500 25 200 40.0
7 Gravel Column 10
-4 0.5 0.300 22 3 40.0
8 Clay Overlay 10
-9 0.5 0.325 19 4 31.0
9 Sand-Gravel 10
-3 0.5 0.225 17 0 37.5
10 London Clay 10
-11 0.5 0.325 20 5 28.0
shear strength
geo-hydraulic
3.2. DEFINITION/DETERMINATION OF THE GEO-HYDRAULIC AND SHEAR STRENGTH
PARAMETERS
The next step in developing a numerical model is to assign materials to the
regions as defined in the numerical model before. The geo-hydraulic and shear
strength parameters are the key parameters for seepage and stability analyses.
To assign reliable inputs to the numerical model, geo-hydraulic parameters are
implemented that are included in different books and papers, e.g., in Haselsteiner
(2007) [8] and the referenced literature sources. In Haselsteiner (2007) [8] the
geo-hydraulic parameters are compiled from 17 different literature sources. The
compiled geo-hydraulic parameters are categorized in accordance with typical
embankment dam zones such as gravel drain, gravel fill used for the dam body
and underground, sand material, surface sealing and alluvial clay/loam.
‘Saturated only’ option was selected for the steady state seepage analysis
and for the material shear behavior, the ‘Mohr-Coulomb’ model was selected.
The geo-hydraulic and shear strength parameters that are implemented to the
numerical model are given in Table 1.
Table 1
Geo-hydraulic and shear strength parameters for the zones of the embankment
dam
3.3. DESIGN SITUATIONS AND LOAD CASES
The design, construction and operation of a dam with a reservoir need to
be developed in consideration of its long-term performance that is affected by
boundary conditions such as reservoir water level, traffic loads, performance of
the dam zones, climate impacts, etc. Therefore, corresponding design situations
and load cases need to be defined during the design stage especially for the
seepage and stability analyses.
1639
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik