Seite - 1643 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1643 -
Text der Seite - 1643 -
downstream embankment slope (using SLOPE/W software, GeoStudio 2016). The
FoS values are obtained only for the sliding slope stability considering the
downstream slope. Results are presented in Table 4.
The required FoS ([1], [2], [3], [5]) are relatively below the calculated
values. In addition, thanks to the conservative dam design and flat slopes in
respect to the limited height of the embankment the static stability is not a matter
of concern. The FoS range show up to 30 % safety margin.
Table 4
FoS Evaluation of the Downstream Embankment Slope Slip Stability
4. HYDRODYNAMIC SOIL DEFORMATION PROCESSES
Fell & Fry [6], [7] developed a process dependent approach for assessing
erosion and suffusion processes. The consideration of more assessment steps in
order to obtain a full risk assessment approach also in consideration of important
aspects such as system identification, detection, measures, etc. [9] supports of a
better understanding and more detailed risk assessment.
Beneath the assessment steps (initiation, development, continuation,
breaching), which are directly addressing the particle transport, the pre- and post-
phases need to be investigated and assessed as well. For the assessment it is
also important to localize the transport processes. Within this localization step
erosion paths shall be defined which are strongly depending on the dam design
and the underground situation. In total three erosion paths are identified as dam
body erosion path (DB EP), underground erosion path 1 (UB EP 1) and
underground erosion path 2 (UB EP 2). Along the erosion paths different sorts of
processes (A to E) are evident which are also checked within the main four
phases of the erosion and suffusion assessment (see Fig. 4).
Source
BS I
1.3
Fell et al., 2005 1.5 1.3 - - - - -
USACE 1.5 1.4 1.3 - - - -
USBR 1.5 1.5 - - - - -
FERC 1.5 1.4 - - - - -
Design condition
FS + GC 1.8 1.8 1.7 1.7 1.7 1.7 1.6
FS - GC 1.8 1.7 1.7 1.7 1.5 1.6 1.5
OS + GC 1.8 1.7 1.7 1.7 1.7 1.7 1.6
OS - GC 1.7 1.6 1.7 1.5 1.5 1.6 1.4
DIN 19700/2004 Required Factor of Safety
Calculated Factor of Safety
Load Cases
1.1
BS
IIIBS
II
1.2
1643
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik