Seite - 1719 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1719 -
Text der Seite - 1719 -
with a perforated Plexiglas plate having holes of 1 mm diameter. Length, width,
and height of the water reservoir were 10, 20 and 100 cm, respectively. Input and
output valves were put on the reservoir to manage the water depth. As shown in
Fig.1, the end of the reservoir tried to mimic the channel form and the direction of
the water and sediment. Additionally, the discharge from the sandy layer was
measured in this section.
Fig. 1
Schematic view of the laboratory flume
The experiments were conducted in two stages. First, nine experiments with
three uniform gradation ranges of 0.4-0.8, 0.8-1.2 and 1.2-2.0 mm and three bank
slopes of 1:1, 1.5:1 and 2:1 for horizontal alluvial layers were performed. The
second stage was done with the three mentioned gradations and bank slopes with
a 5-degree slope for the alluvial layers. In other words, eighteen experiments were
designed and carried out in the same situation in this study. For a summary, the
results of experiments with gradation range of 1.2-2.0 mm will be presented.
Generally, the sandy river banks with alluvial materials are usually
surrounded by non-alluvial materials above and below the sandy layers. So, the
model includes three layers of material: clay, sand and mixed soil with a moisture
content of 20% as a surface layer with a thickness of 5, 10 and 15 cm
respectively. Also, a timber with the same dimensions of the surface layer was
used to provide a uniform load distribution for simulating the river bank, and its
weight is equal to the weight of a 20 cm soil. All the steps were repeated for three
different bank slopes. For the second phase, all of the layers were inclined at
5-degree (Fig. 2).
Fig. 2
A view of the laboratory flume, horizontal and steep alluvial layers
1719
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik