Seite - 1721 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1721 -
Text der Seite - 1721 -
considered cumulative. The third one (d*) is the dimensionless length of internal
erosion.
3. RESULTS AND DISCUSSION
As mentioned before, flow discharge, gradient, and internal erosion length
were measured for different water levels, and the results are presented in graphs.
Hydraulic gradient was calculated by dividing water level by the sample length
minus the internal erosion length. The actual velocity was calculated by dividing
the average velocity by the porosity coefficient.
3.1. DIFFERENT RIVER BANK AND ALLUVIAL LAYER SLOPES
The dimensionless erosion length (d*) over dimensionless time (t*) is shown
in Figures 3 and 4 to see the effect of different bank slopes on the erosion length
in the alluvial layer.
Fig. 3
horizontal
layersfor
mm
2.0-for
gradation range of 1.2
*tand
*dChanges
of
Fig. 4
layers
steepfor
mm
2.0-for
gradation range of 1.2
*tand
*dChanges
of 0
0.1
0.2
0.3
0.4
0.5
0 0.2 0.4 0.6 0.8 1
d*
t* Slope 1:1
Slope 1.5:1
Slope 2:1
0
0.1
0.2
0.3
0.4
0.5
0 0.2 0.4 0.6 0.8 1 1.2
d*
t* Slope 1:1
Slope 1.5:1
Slope 2:1
1721
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik