Seite - 1733 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1733 -
Text der Seite - 1733 -
load, earth pressure and dead load, the load case ”tree failure” is also considered
in form of a geometric slope failure criterion. The load case is considered e.g. in
the German technical standard for waterways MSD [9].
The mentioned technical standard recommends a reduction of statically
required slope inclination. Two different failure modes need to be distinguished.
In one case, a tree located on the downstream slope falls, in the other case a tree
located on the downstream slope falls. For the tree located on the downstream
slope a so-called minimum cross section is defined in MSD [9], which shall be
considered for the special load case (Fig. 3). MSD [9] is prepared for
embankment dams along waterways with permanent water level, so that trees
within the upstream area are not considered, as it is required for levees [13].
Fig. 3
Minimum statically required cross section according to the load case “tree failure”
defined in MSD [9]
Usually trees located at the hinterland or on the downstream slope of an
embankment dam are not endangered by flood and a loss of shear strength of
the rooted soil area but by strong winds. The coincidence of a flood and storm is
quite unlikely to occur. Storm events are preceding flood events. Therefore, the
decisive load case for flood embankments and levees is usually the failure of a
tree, which is located at or on the upstream slope and which is induced by a loss
of shear strength of the rooted area. In consequence, the static sealing element
has to be designed as a “free standing” wall which covers a vertical height span.
This span can embrace the entire upstream dam shoulder reaching down to the
foundation. For the case study, the static function of the sealing element is
designed for this total loss of the upstream slope, which is justified by missing
foreland, steep slope inclination, and strong flow velocities during flood that might
lead to erosion process. The height of the dam crest and the downstream slope
was not reduced.
Another boundary condition that has to be set is reflected by the
groundwater situation. The software package of GGU allows selecting two
different methods. The first method assumes a linear hydrostatic pore water
pressure on both sides of the sealing. It is a simplified and conservative
approach, since the pore water pressure is usually overestimated. More realistic
pore water pressures can be achieved by the second method, which determines
the pore water pressure, based utilizing a FEM analysis based on the theory of
potentials. For the second approach the geohydraulic parameters for all soils and
1733
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik