Seite - 1734 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1734 -
Text der Seite - 1734 -
materials, such as permeability coefficients, effective pore content, etc. need to
be available. Hence, the second approach is likely to produce results that are
more realistic. The input parameters were defined by laboratory testing. It was
applied for the case study.
In order to guarantee the serviceability of the future dam structure the
deformation for the decisive load case was limited to L/100 (L = length of the
sealing element). The length is defined as the vertical height of the sealing
element.
3. DESIGN ASPECTS
3.5. GENERALS
The entire length of the existing embankment dam section in the project
area is approximately 2.7 km. 2.05 km of the embankment dam shall be
strengthened by placing a static sealing element. A length of 0.8 km shall be fit
with an earth concrete wall realized by the so-called mixed-in-place (MIP) wall.
The MIP method destroys the actual the grain structure of the soil in situ
and mixes the soil with a cement suspension. The method was developed by the
company BAUER. Fig. 4 shows a schematic illustration of the method. This
method uses generally three auger drillings which are rotating in opposite
directions. The wall itself is established by the pilgrim step method so that each
lamella is overlapped by new stitches at least once.
Fig. 4
Schematic illustration of the MIP method (Source: BAUER Spezialtiefbau GmbH)
By placing steel sheet piles into the suspension ditch, the MIP wall can
bear loads due to the arching effect utilizing only compressive strength of cement
bounded materials.
1734
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik