Seite - 1735 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1735 -
Text der Seite - 1735 -
3.6. DESIGN CROSS-SECTION
The complete embankment dam construction lot was divided into different
sections. For each of section a design cross-section was prepared. Fig. 5 shows
geotechnical design cross section for the decisive load case “tree failure” which is
allocated to the permanent design situation “BS-P” according to DIN 19712 and
EC 7.
Fig. 5
Geotechnical design cross section for the load case “tree failure” (BS-P)
The height of the considered levee cross section is approximately 2.0
meters. A minimum freeboard of 0.5 m was applied. The embankment slope
downstream is not that steep in this design cross-section. It is V:H = 1:4.4. The
groundwater level was assumed to reach the ground surface level downstream
and a selected rapid drawdown water level upstream.
3.7. CHARACTERISTIC SOIL PARAMETER
In order to carry out the required analyses for design, characteristic soil
have to be selected. Table 1 gives an overview of the given characteristic values
for the soil layers according to the laboratory tests.
Table 1
Characteristic soil parameters
1735
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik