Seite - 1755 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1755 -
Text der Seite - 1755 -
The Specifications for the Geomembrane and Geotextile used in Chitgar Lake bed are provided in
the Tables 2.
Table 2. Geomembrane Specifications used in the lake bed
Table 3. Geotextile Specifications used in the lake bed
4.2. Implementation of Water tightening Layer on Upstream Slope of Chitgar Dam and
Perimeter Dykes
The main water tightening member of the dam and perimeter dykes is the Geomembrane protected
by Geotextile layers. The recommendations of ICOLD Bulletin 135 were used as reference for
installation of Geo-synthetic material and associated details as follows:
A) Base Layer: To provide a smooth and suitable surface for installation of Geomembrane, first the
coarse aggregates and small rocks from the face of the dam were removed and then a 5cm-thick
shotcrete was placed on the dam after grading and trimming.
B) Protective Bottom Geotextile: To ensure the Geomembrane is protected against physical damage
and also to provide adequate friction at the base, a 500g/m2 Geotextile was used underneath the
Geomembrane layer. The GT 12a standards was used for quality control of this protective layer.
C) Impervious Geomembrane Layer: For the Geomembrane layer on the dam’s slope and on top of
Geotextile layer, the HDPE type Geomembrane conforming to GM13 standards was used. The
specification for the Geomembrane is as follows:
ď‚· Thickness: 2.5 mm (ASTM D5199)
ď‚· Density: 0.94 gr/cm3 (ASTM D792, ASTM D1505)
 Tensile strength ≥ 37 KN/m (ASTM D6693)
 Elongation at break ≥ 700 % (ASTM D6693)
 Tear resistance ≥ 311 N (ASTM D1004)
 Puncture resistance ≥ 800 N (ASTM D4833)
D) Top Protective Geo-Textile: The Top Geotextile layer is to protect the Geomembrane during
installation and particularly during placement of upper protective soil/rock fill layer. This layer
is placed on top of the Geomembrane and is free to move in order to prevent possible stress
transfer from the top layer to the Geomembrane. Reference
Spec.
Description
ASTM D5199
1.5 mm
Thickness
ASTM D1505/D792
0.940 gr/cm3
Density
ASTM D6693
:)type IV
Tensile strength
≤ 22 KN/m
Yield strength
≤ 40 KN/m
Break strength
≤ 12%
Elongation at Yield
ASTM D6693
≤ 700% type IV)
Elongation at break
ASTM D1004
≤ 187 N
Tear resistance
ASTM D4833
≤ 408 N
Puncture resistance
ASTM D4218
2-3%
Carbon Content
ASTM D3895 – 5885
100 min
Standard Oxidation Induction Time
ASTM D5397
300h
Resistance against crack propagation(SCR)
ASTM D5885
80% of Oxidation Induction Time
Oven Aging (Hp) After 90 Days
ASTM D5885
50% of Oxidation Induction Time
Resistance against UV radiation After 1600 hours
Reference
400 gr
Geotextile Type
ASTM D5261
≥ 400 gr
Weight per meter square
ASTM D4632
≥1.33kN
Tensile Strength
ASTM D4632
≥ 50%
Elongation
ASTM D4533
≥ 0.51
Resistance against Rupture
ASTM D4833
≥ 0.62
Resistance against puncture
1755
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik