Seite - 1758 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1758 -
Text der Seite - 1758 -
Aging. In the process the short-term tests results obtained from Iranian Lab were also verified.
Followings test were conducted on the samples:
Oven Aging for a duration of 90 days
Resistance Test against UV radiation
Stress Crack Resistance (SCR)
Geomembrane Joints Welds
Test results were as follows:
The Oxidation time reduction amounts from HP-OIT test after over aging were within the
acceptable range. The reduction rate was also verified in the 90-Day test.
The Oxidation time reduction amounts from HP-OIT test after continuous UV radiation
were within the acceptable range.
The procedure for OIT testing for a particular product made by Rowad Company had a
direct impact on the obtained results. The difference between the results obtained from in-
country and oversea testing Labs (on the over aging results) were mainly due to variation
in testing procedures.
Results obtained from Stress Crack Resistance test from Iranian and Canadian Labs were
in complete agreement.
5. Construction Difficulties
Installation of the Water tightening layer for the Lake had its specific challenges and difficulties
some of which are listed below:
Harsh Weather Condition (wind storm and cold weather) during installation of
Geomembrane
Difficulties for Iranian manufactures to supply Geotextile conforming to GT12A standards
Most Iranian Manufactures failed to provide products certificates
Foreign Purchase and Import difficulties due to the Sanctions against Iranian Government
Timeliness for customs clearance and release of products to do standard tests on materials
Gradual impounding concurrent with the construction to meet the project deadline
Limited access to different regions of the lake to avoid possible machinery damage to the
installed Geomembrane
Timeliness of quality control process for the membrane
Fluctuations of exchange rate and associated complications to finalize the price from
receipt of Performa to time of approval and budget availability
6. Concluding Remarks
The artificial Chitgar Lake project has significantly contributed to improvement of landscape,
environmental and public recreation of Tehran City. Due to limitations on impounding time and also
high evaporation rate during summer, the use of Geomembranes was selected as the preferred
method among other researched alternatives for Water tightening of the reservoir at the Chitgar
Lake. The project faced many challenges in supply and installation of the Geomembrane impervious
layer. Since the use of Geomembrane was not common in Iran, finding local manufacturers and test
labs specialized in quality control of such products was extremely difficult. In addition, the
fluctuations of currency exchange rate during construction made it difficult to order and purchase
the products.
Fortunately in spite all the commercial complications and construction difficulties, the project was
executed according to plan while fulfilling all the quality control requirements. Considering the
time constraint and duration of the project and the direct impact of the Lake Water tightening activity
situated on the critical path of the schedule, the client decided to use both Iranian and Foreign
Geomembrane products. Therefore the Geomembranes were supplied by four different
manufacturers one of which was Iranian. For the quality control, Sageous Test Lab, a Canadian
Company along with an Iranian Test Lab was selected.
1758
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik