Seite - 1803 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1803 -
Text der Seite - 1803 -
excavation surface from 3.5 m below the surface and the excavation could
continue down to 4 m below the surface. In addition, the bedrock was not found
within the excavated depth, and the mixture of buried layer (silty gravel layer
mixed with sand) and boulder stones was distributed in the downstream area of
the water-collecting wall. There was no damage or leakage such as cracks and
breakage on the concrete of the collecting wall, indicating the condition of
construction is generally acceptable (Fig. 7)
Fig. 7
Result of NPT-2 Test Pit Excavation
3.4. MEASURING CONCRETE STRENGTH
The concrete strength was measured by using the Schmidt hammer and
performed on the collecting wall and the measuring room. As a result of
measuring the strength of the collecting wall and the lower spots of the wall in the
positions NPT-1 and NPT-2 where the test pit investigation was conducted, the
average uniaxial compressive strength was 19.6 ~ 19.7MPa, and the
compressive strength compensated based on the age coefficient was estimated
at 12.3 ~ 12.4 Mpa.
The concrete strength of the seepage measuring room was measured in
one place inside the measuring room. The average uniaxial compressive strength
was 23.1MPa and the compressive strength compensated based on the age
coefficient was estimated at 18.3 Mpa.
3.5. BORING INVESTIGATION
The boring investigation was carried out at eight positions selected to
determine the stratigraphical composition of the lower area of the collecting wall.
The depth was determined based on the extent to which the bearing stratum is
confirmed and the casing was gradually insderted down to the bottom of the
weathering soil and the standard penetration test was performed at the same
1803
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik