Seite - 1817 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1817 -
Text der Seite - 1817 -
Table4. Seepage distribution from < 2
3 F.D.C. to F.D.C.
Part hi q (m3/sec/m) â đ (%)
<2/3 F.D.C F.D.C.
4th 0.5<hiâ€0.75 5.93Ă10-6 1.68Ă10-7 -97.17%
(2.16%) (2.94%)
3rd 0.1<hiâ€0.50 5.12Ă10-5 2.70Ă10-6 -94.74%
(70.42%) (43.17%)
2nd 0<hiâ€0.10 1.29Ă10-5 2.09Ă10-6 -83.70%
(17.69%) (36.61%)
1st hiâ0 2.70Ă10-6 7.62Ă10-7 -71.80%
(3.72%) (13.32%)
Total 7.27Ă10-5 5.72Ă10-6 -92.13%
(100%) (100%)
The measured seepage data from 1984-1987 and 2014-2017 along with finite
element seepage analysis result in Table.4 followed 4 parts of seepage penetration
resistance. Long term seepage through core zone reduces by 92.13%. Seepage discharge
almost penetrates the core zone in range hi †0.5 for short term 97.84% and long term
97.06% of average total seepage discharge. Core zone layers at hi > 0.5 rapidly increased
L and S.P.R. but seepage discharge for initial and final stage is 2.16% and 2.94% of average
total seepage discharge, respectively. Core zone layers in 0.1< hi †0.5 gradually raise L
and S.P.R. however seepage discharge is mostly influence from average total seepage
discharge for initial stage (<2/3F.D.C.) and final stage (F.D.C.) about 70.42% and 47.13%,
consecutively. Layers in core zone 0< hi †0.1 is rapidly increase L and S.P.R. but seepage
discharge for initial and final stage is 17.69% and 36.61% in order. Contact clay layer
(0.30meter from bottom of cutoff trench) at bottom of core zone hi â 0 is minimum L and
S.P.R. and minimum of seepage discharge reduction. Seepage discharge distribution
dissipate to bottom layer 0.1< hi †0.5, 0< hi †0.1, hi â 0 from initial stage 70.42%, 17.69%,
3.72% to final stage 47.13%, 36.61%, 13.32%, respectively. As part1 hi â 0, contact clay
layer has minimum reduction of seepage discharge 71.80%, maximum seepage discharge
distribution from 3.72% to 13.32% or 3.58 times and minimum increase in factor of safety
against uplift 255.80% exhibited boundary condition of core zone weak layer.
4. CONCLUSION
Long term performance index (L), Seepage penetration resistance (S.P.R.) represent
an overview and inter-layers seepage through core zone layers changes between initial
stage (before2/3 full degree of consolidation) and final stage (full degree of consolidation).
Significant seepage discharge penetrated core zone below middle height (hi †0.5)
for initial stage 97.84% and final stage 97.06% of total average seepage discharge.
Minimal seepage discharge penetrated the core zone above middle height (hi > 0.5)
1817
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen UniversitÀt Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik