Seite - 1842 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1842 -
Text der Seite - 1842 -
a narrow barrier (or curtain) through an area of high permeability. It usually consists
of a single row of grout holes which are drilled and grouted to the base of the
permeable rock, or to such depths that acceptable hydraulic gradients are
achieved. For large dams on rock foundations, dams on very permeable rock or
where grouting is carried out in soil foundations, 3, 5 or even more lines of grout
holes may be adopted. The Left Embankment Dam adopted curtain grouting
mainly for dam foundations on sound rock or slightly weathered rock including
below the cut off wall. A single line of grout holes was adopted since this was
appropriate to achieve the specified permeability parameter/ Lugeon value of 1Lu.
The holes were drilled and grouted in sequence to allow testing of the permeability
of the foundation (by packer testing) before grouting and to allow a later check on
the effectiveness of grouting from the amount of grout accepted by the foundation
(“grout take”). Grout take is the measured quantity of grout injected into a unit
volume of formation, or a unit length of grout hole. Grout is a mixture of
cementitious or non-cementitious material, with or without aggregate, to which
sufficient water or other fluid is added to produce a flowing consistency.
The grout holes / borehole were drilled using percussion drilling—a drilling
technique that uses solid or hollow rods for cutting and crushing the rock by
repeated blows. Percussion drilling methodology that was applied used hollow
steel pipes that allow for rock core recovery to be utilized in the logging of the
geological profile of the dam foundation along the dam axis. The employer
specified drilling of boreholes by use of either percussion drilling method or rotary
type diamond drilling. The EPC Contractor utilized the percussion drilling method
1842
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik