Seite - 1945 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1945 -
Text der Seite - 1945 -
installing pressure relief elements or by placing berms. Especially, relief
drainages have proved very successful in Austria during the last excessive floods
along the rivers Danube and Morava.
However, until now the design of relief drainage systems was based on
rather insufficient basic principles, strong simplifications and idealizations. For the
quantification of the discharge from relief columns only assumptions based on
numerical models are in use. Therefore, various model tests were performed to
study the of relief drainage behavior and quantify the water discharge.
Fig. 1
Duration of floods along the River March dykes (Water level at Dürnkrut –
Austria/Slovakia; adapted after via donau). Two floods within three weeks in
2010.
Durée des inondations le long des digues de la rivière March (Niveau d'eau à
Dürnkrut – Austria/Slovakia; adapté après via donau). Deux inondations dans les
trois semaines en 2010.
2. FAILURE MODES OF DYKES AND LEVEES
Knowledge of possible failure modes due to underseepage is an essential
prerequisite, both for a reliable quality assessment of existing dykes and dams
and for an optimised design of new ones. The simplified scheme of Fig. 2
illustrates the main failure mechanisms as observed in most cases.
Actually, it is often difficult to precisely determine the causes of a dyke
failure. Statistical analyses show that overtopping and internal erosion are the
most common failure modes. While many of these failure mechanisms occur
relatively fast, the erosion by underseepage develops more inconspicuously. If a
groundwater communication below the dyke is possible, the aquifer or the
overlaying low permeable layer can be progressively eroded during hydraulic
loading. Hydraulic failure is critical because there may not be any external
evidence, mostly only soil boiling can be found.
1945
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik