Seite - 1972 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1972 -
Text der Seite - 1972 -
This spatial layout is for a general statement; however, it cannot be sufficient
for a special feature such as grout curtain where grout galleries are within a tunnel
or gallery [3]; like grouting in Glevard where the 30° dip never accepted. The
mentioned method, which mentioned to clarify that the selection of the requested
feature, based on the engineering geological investigation strategies (at least with
two methods).
For a borehole which is drilled towards 125° (D=62° and m'=13.6°) to be
within the grout curtain, it is necessary that its dip is 73°, which is very inconsistent
with 30°. As the result, dip of the best borehole, which is 30° with this method, not
accepted, as it is not located in the grout curtain.
Therefore, selection method will be the same approximate method that
provided the borehole as 50/70, which is quite different from the primary state of
140/70 (perpendicular to it) and these two boreholes, which have crossing state,
used to fill out the grout curtain [4].
The least value in this diagram is zero and 130 degree (borehole dip is in the
inclined plane). The horizontal borehole is not acceptable and therefore, θ = 130°.
The dip of four joint sets is 67, 78, 82 and 84 degrees, with an effective weight of
31, 22, 20, and 27 from 100(wi).
The least value is 125 and 305 degrees. As the value of θ estimated at 130°, the
125° azimuth selected.
1972
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik