Seite - 1999 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 1999 -
Text der Seite - 1999 -
3. DRILLING WORKS
All drilling operations for the grout holes were performed as rotary core
drillings (with diamond core bits) with 46 mm diameter, the drainage holes were
performed with 86 mm. For the core extraction (core diameter of 33 mm), a double
tube core barrel was used. Narrow space on the crest of the dam required the use
of a small, light-weight portable hydraulic core drill. On the crest a Sandvik DE110
drilling equipment was used for the downward grout holes. Confined space inside
the inspection gallery and the possibility to drill a grouting fan in 360 degrees
required the use of a light rotary drilling rig Hilti DD200.
Figure 5: Drilling Works from Inspection Gallery (Hilti DD200)
Figure 4: Tender Design (left) with Primary and Secondary Grout Holes (orange);
Execution Design (right) with Primary (red) and Secondary Grout Holes (blue)
1999
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik