Seite - 2038 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2038 -
Text der Seite - 2038 -
4.3.3.Test Results
4.3.3.1.Adhesion resistance:Centered on the natural attachment density and
biomass and supplemented by the remaining test results, SK-polyurea 1, silane
impregnation, SK-epoxy YEC and fluorocarbon resin presented a better
performance in all indicators, and followed by modified silicate, modified acrylic
resin and cementitious permeable crystals.
4.3.3.2.Erosion resistance:From the perspective of erosion resistance,
especially carbonization resistance, we can learn that the effect of SK-polyurea 1,
SK –epoxy YEC, modified elastic epoxy resin and SK-polyurea 2 are better in all
aspects, but SK-polyurea 2 will be blistered after being immersed in water for a
period of time, which will affect the durability. Therefore, according to the erosion
resistance performance, SK-polyurea 1, SK-epoxy YEC and modified elastic epoxy
resin are the best painting materials. However, it shall be noted that, for new
concrete, if polyurea and epoxy are selected, the construction time shall not be too
early according to their performance of compressive strength and the painting
operation cannot be carried out until the concrete is fully hydrated. For the existing
concrete, if a better construction effect will be guaranteed, certain construction
conditions (for example, surface moisture content shall be within a certain range)
shall be satisfied before the construction.
4.3.3.3.Comprehensive result:The attachment experiment results show that
SK-polyurea 1, silane impregnation, SK-epoxy YEC, fluorocarbon resin, modified
silicate, modified acrylic resin and cementitious permeable crystals have a better
adhesion resistance. Considering a poor durability of silane impregnation and
fluorocarbon resin and a higher cost of polyurea and other factors, SK-epoxy YEC,
modified acrylic resin and cementitious permeable crystals are recommended as
the suitable protective materials for concrete in combination with the consideration
of adhesion resistance, erosion resistance, environmental protection, construction
feature, durability, economic benefit and other factors.
Modified acrylic resin 30.0 16.51 18.5 2.75 Local
spalling
Polyurethane 30.4 17.32 14.8 0.88 Common
bubbling
SK- polyurea 2 29.4 18.06 11.7 0.96 Local
bubbling
SK- epoxy D50 30.5 17.33 13.9 0.96 Local
bubbling
DPS+TS 34.5 14.12 20.7 3.25 Null
2038
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik