Seite - 2059 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2059 -
Text der Seite - 2059 -
to calculate flow which go under pressure under a square or circular culvert
(the pipe of a penstock for example) in every condition.
The problem has been set with these parameters:
- Initial time = 0 s
- Max simulation time = 3600 s
- Results time interval = each 120 s
- Max increment time = 2 s
- CFL = 0.45
- Wet/dry limit 0.01 m
- Molecular viscosity = 0.000001 m2/s
- Turbulence model = k- ɛ, limit depth 0.01 m, first order scheme.
Performing this simulation, it can be observed that stabilization time for normal
condition (uniform flow at the inlet and at the outlet of the system) is around 2800 s.
Finally, in the results are observed two big recirculation areas of turbulence, just near
the penstock inlet, affecting the submergence safety conditions.
Fig.2
Forebay: Plan view of resulting turbulence areas for the original design
Fig.3
Forebay: Plan view of mesh cells (left) and resulting velocities vectors and
contours, with legend.
2059
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik