Seite - 2061 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2061 -
Text der Seite - 2061 -
Fig.4
Section view (left) and isometric view (right) of velocities distribution at the
penstock inlet in ANSYS
2.5. OPTIMIZATION OF THE EMERGENCY SPILLWAY
Furthermore, through ANSYS has also been studied the propagation of the
big wave (surface wave) caused by the turbine closing due to load rejection, and
model its evolution in time and space from the forebay to its spillway, characterizing
discharged water behavior during this case. The target of this analysis was to
assess the safety of the adduction system in case of load rejection, against the
Fig.6
Section view (left) and plan view (right) of diverted flow in case of turbines
fast closing due to load rejection in ANSYS.
water local elevations caused by the big propagation wave, in order to avoid
that water flow out of the system in not allowed zones. The big wave propagation
throughout the whole plant's adduction system has been modeled, in order to
assess the risk that the wave crest touches the upper limit of the adduction
conduction. It has been observed that wave propagation modeling reduces
spillway efficiency. Results helps on proper re-location and optimal design of
spillway to improve its discharge capacity. By optimizing position of the spillway,
the wave crest cannot reach the upper threshold of the emergency spillway, due
to a proper design of its height. Furthermore, the water along the whole adduction
never reaches the top pf the channels walls.
2061
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik