Seite - 2076 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2076 -
Text der Seite - 2076 -
soil, decomposed rock) had obstructed the drainage of the TfX layer. Initial
seepage from the tunnel raised the pore pressure in the slope, triggered the failure
and opened the drainage. The hydrogeological regime changed drastically,
resembling a scenario, which Benson [13] had presented as Case D, the
intercalation of a pervious zone in the rock. The distance of the potentially pervious
zone to the failed block measured only 9m, a strong seepage gradient developed
(see Figure 7) and the rock eroded. The hydrogeological regime progressively
deteriorated and the damages along the tunnel propagated laterally. Figure 8
attempts to interpret and illustrate significant steps in the failure process.
Figure 7
FEM simulation of hydraulic gradient in crown pillar between tunnel and TfX layer
Simulation MEF du gradient hydraulique entre le toit du tunnel et TfX en haute
Comparing options for rehabilitation of the tunnel (repair and strengthening
of the liner, new concrete liner, geomembrane or steel liners), the steel liner
emerged as optimal solution. After installation of 300m steel lining for the damaged
stretch, initial leakage amounted to 20 l/s. With time, the losses declined to 6 l/s.
8. CONCLUSIONS
The conservatively designed tunnel failed in a stretch of good rock where the
cover according to Norwegian and Australian criteria would have admitted an
unlined tunnel. Checking the design against the concepts proposed by Schleiss [8,
9] and Fernandez [11, 12] also predicted an acceptable performance. Analytical
methods (e.g. [18]) as well as digital simulation, based on information available at
design stage, indicated minor steady state seepage relaxing stresses on the liner.
The post-failure investigations traced the causes of the failure to a
combination of geological and hydrogeological details. The interaction of these
2076
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik