Seite - 2097 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2097 -
Text der Seite - 2097 -
Fig. 3
Preliminary 2D plane strain model and predicted principal stress rotation
The model has a length of 1400m and a height of 900m and consists of about
20000 15-noded elements. The results of this analysis confirmed a significant
rotation of principal stresses in the region of the powerhouse cavern. Fig. 3 shows
the entire 2D FE model and a zoom of the region next to the powerhouse cavern.
The results indicate a rotation of the major principal stress
1 to the vertical axis of
roughly 25°.
4.2. 3D FINITE ELEMENT ANALYSIS
Since the stress distribution (and redistribution) in the region of the side
tunnels and gate chambers during the construction of the caverns is one of the key
issues of the 3D FEA, the mesh discretization of the caverns and the surrounding
material has to be relatively fine and therefore the finite element models discussed
consist of about 500000 10-noded elements with quadratic shape function. The
model dimensions L/B/H are 550/165/175m. Fig. 4a shows the geometrical
definition and the finite element discretization of the two caverns, the side tunnels
and the gate chambers. All calculations were performed under drained conditions.
To obtain realistic deformations of the caverns and a reliable stress distribution in
the surrounding soil, it is necessary to model a realistic initial stress field and the
relevant construction phases. Therefore the “rotated” initial stress field, as defined
from the preliminary 2D FE analysis (briefly discussed in chapter 4.1), was imposed
(see Tschuchnigg et al. [4]). To include the construction sequence of the caverns,
the cross section was subdivided into 6 or 7 main sections respectively (see also
Fig. 2 - excavation level E1 to E6). In longitudinal direction, the excavation phases
are modelled with excavation lengths between 3.0 to 9.0m. In total, 187 calculation
phases are defined in the analysis. Fig. 4b shows exemplary the excavation phase
of excavation level E2 in the powerhouse cavern.
2097
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik