Seite - 2123 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2123 -
Text der Seite - 2123 -
HYDRO-FRACTURING TESTING AND DESIGN ADJUSTMENTS
Considering the risks linked to the uncertainties in rock mechanical and
hydrogeological conditions, the owner of the project decided to conduct investiga-
tions concurrent with the construction of the headrace tunnel. From the advancing
tunnel, exploratory drilling with core recovery, permeability, dilatometer and hydro-
jacking and on core samples laboratory tests was performed. Table 1 summarizes
the results of the hydrofracturing tests, and Figure 6 shows the stress ratio σh/σv
at the six test sites.
Fig. 6
Cover above tunnel (columns) and
stress ratio at the six test sites
(upstream on right) Couverture rocheuse au-dessus de la
galerie en charge (colonnes) et rapport
de contrainte aux 6 points d'essai
(amont à droite)
The minimal in-situ stress in the rock mass, independently of the direction,
must be higher than the maximal internal water pressure in the tunnel (confinement
criteria above 1.0, cf. Marence [4]). Under such conditions, leakage water will not
be able to open existing joints and discontinuities causing high water losses and
possibly instabilities on the surface.
The results of the hydro-fracturing tests performed in the Quitaracsa
pressure tunnel indicate unexpectedly low minimal stress levels, basically due to
the minor horizontal principal stress σh having been found in the order of only 20%
to 40% of the corresponding σv values. In order to not over-estimate the minimum
2123
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik