Seite - 2161 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2161 -
Text der Seite - 2161 -
3. METHOD OF MODIFYING
It is not possible to replace readily the trifurcation with modified trifurcation
because the trifurcation is embedded in the deep underground and covered with
thick steel-concrete.
The only one solution is to modify the inner side shape of the trifurcation
and improve the water flow conditions as shown in Fig. 8. For more stable water
flow distribution, it is planned to install the enlarged deflection plates linearly
connecting and covering the inner space of trifurcation between the main
penstock and the branched penstocks.
Fig. 8
Shape of modified trifurcation
4. COMPARING THE BEFORE AND AFTER MODIFYING THROUGH THE
SIMULATION
4.1. SIMULATION CONDITIONS
For the simulation, a computational grid of approximately four million grid
nodes was applied for a numerical model. The grid was refined towards the wall
in order to satisfy that the relative wall distance y+ of the nearest cell is in the
range between 10 and 300, which has to be satisfied for an accurate prediction.
The distribution of the y+-value is shown in Fig. 9 below.
Fig. 9
Distribution of the y+-value on the geometry
2161
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik