Seite - 2164 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2164 -
Text der Seite - 2164 -
4.4. LOAD CASE 3
The same applies for the operation of the middle unit and a side unit. Here
also pressure oscillations occur for the existing geometry as shown inFig. 13
below. When installing the deflection plates, pressure oscillations no longer
occur.
Fig. 13
Total pressure difference between inlet and outlet cross-sections, load case 3
4.5. LOAD CASE 4
When both side units are in operation, severe oscillations reoccur. The
amplitudes are approximately half of those in load case 1 as shown in Fig. 14
below. However, the installation of deflection plates cures the problem and no
further oscillations occur.
Fig. 14
Total pressure difference between inlet and outlet cross-sections, load case 4
4.6. THE RESULTS OF NUMERICAL ANALYSIS
The analyses of the measurement data and the numerical simulation of the
existing geometry clearly show that the power oscillations are caused by the
2164
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik