Seite - 2174 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2174 -
Text der Seite - 2174 -
packing is added with tub height of transport vehicle to road 600 mm it becomes
4720 mm so it is still safe against high net between road and bridges girder
concrete along toll roads having an average of 4900 mm.
4.2. UNLOADING AND INSTALLATION
4.2.1. Supporting Equipment
In November 2016 until beginning of February 2017 water surface
elevation above 105.50 and even runoff, which means that contractor/implementer
does not get discharge recommendation permit due to work safety support at
bottom. As a result of limpas water in morning glory there are some workbench
components process of disassembly and installation hollow cone valve lost
carrying water flow. Some missing components are immediately followed up by
creating a replacement. The material is unloaded from the freight at logistics
warehouse location and gradually shipped to morning glory gradually due to load
for passing main dam should not exceed 3 tons.
In February 11th, 2011 Jatiluhur water surface elevation is still above the
elevation 105.5 but if see the trend of reservoir water surface elevation is
decreasing plus reference from Prakirawan BMKG West Java through portal
http://www.bmkg.go.id weather for upstream area which precipitate reservoir
tends to narrow with frequency decreasing so that decided as beginning of
discharge old HCV followed by installation new HCV. Beginning installation of
work aids discharge and installation HCV begins with installation of safety net
that functioned as last safeguard in case of work accidents and material tools that
fall not directly into drainage hole.
The next installation work tool is installation of lifting table components
which lost due to washed away by water runoff. The next work process is
checking the wheels of trolley wheels and coloumn wheels lifting whether the
bearings on the wheels are still functioning properly.
Another work tool is lifting column which function to lifting and lowering
old and new HCV from moving table to lifting table then vice versa.
2174
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik