Seite - 2221 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2221 -
Text der Seite - 2221 -
key staff. This postulate is fulfilled with the technologies lined out. Segmental
lining is offering the advantage of high quality segment prefabrication outside the
tunnel and quick and accurate installation within one working cycle inside the
tunnel. Remaining in full compatibility with high performance TBM-DS excavation,
simple precast lining systems, meeting all requirements of common headrace
tunnels, have been developed and optimized during the recent 20 years [5], [6],
[8], [9] [10], [12], [13].
Such lining systems commonly are composed of a parallel ring system with
rhomboidal or hexagonal precast segments. The annular gap fill most frequently
is mortar in the invert and pea-gravel in the circumference, which is
systematically contact grouted within a separate step, followed up by borehole
grouting where required. Such a lining system is able and suitable to fulfill most
requirements of a final lining of a headrace tunnel.
5. BEST FITTING LINING SYSTEMS
As already lined out above, the key task of designing a headrace tunnel, is
to gain as much benefit and cost saving potential from the surrounding rock
mass. In terms of the sealing and bearing requirements, the most common lining
types for headrace tunnels can be defined as follows (Tab. 1):
Table 1: Legend for different lining systems
Tab.2 comprises the main tasks and requirements for the applicability of
the common lining types.
NOL no lining(invert only)
USL unsealed concrete lining
USL+BHG unsealed concrete lining + borehole grouting
PSL pre stressed lining
PMSL plastic membrane sealed lining
SMSL steel membrane sealed lining
SRM rock mass supported steel liner
SSB self bearing steel liner
2221
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik