Seite - 2243 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2243 -
Text der Seite - 2243 -
or as a partially filled pipe with open channel behavior. If the lower chamber is
full, liquid inertia of both, the chamber and the rising shaft, is considered. A local
rise or fall of the liquid level at the base point throttle is also numerically possible
as well as different liquid levels in the rising shaft and the upper chamber mainly
resulting from the differential effect caused by the vortex throttle. Horizontal liquid
levels in the aerated chambers are assumed since there were no significant
effects of surface waves expected. This assumption is confirmed by the
comparison with measurements shown below. The charging and discharging of
the upper chamber is possible in two different ways depending on the liquid level:
By means of the vortex throttle if the liquid level is below the weir
crone of the rise shaft (1)
And additionally by means of weir overflow if the liquid level is
above the weir crone (2)
Fig. 2
Surge Tank of HPP Kops I: left: general view, middle: top view of vortex throttle,
right: cross section of vortex throttle
For a correct modelling of the surge tank behavior in such detail, additional
information and boundary conditions are necessary. To get appropriate data of
the hydraulic losses of the throttles and the hydraulic behavior of the chambers
and weirs, analytical models based on technical literature [5], [6], [7], [8] or 3D
numerical simulations have to be developed. A successful application of 3D
numerical simulations to get the necessary information of hydraulic data to model
the surge tank behavior correctly in the course of 1D numerical waterhammer
simulations has been shown by Meusburger [9] and Veide et al. [3].
4. NUMERICAL RESULTS AND COMPARISON WITH MEASUREMENTS
4.1. VALIDATION OF THE NUMERICAL RESULTS (1)
(1)
(2) (2)
2243
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik