Seite - 2255 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2255 -
Text der Seite - 2255 -
similar situation happened and optimisation was provided, but due to a lack of
time and higher costs not all modifications could be integrated into the final intake
design. Yet, according to [11], more deviation is allowed for the velocity in the
intake and a summary of additional criteria is given by [12].
Fig. 2: Left: Velocity distribution at intake, full model and intake only simulation,
Right: Fisher Franke analysis for full model and intake only simulation
Fig. 3: Numerical simulation versus prototype test
The turbines were model-tested and during the development phase also
numerically analysed. After the start-up of the turbines a comprehensive test of
the two units was realised, including efficiency and vibration tests. In Fig. 6 the
measurement data for the electrical power is shown versus the flowrate for the
two units normalised with a maximum flowrate of QMax = 115 m³/s and the
maximum generator power of PGenerator,max = 11 MW. The differences between the
two units are visualised in red for the relative difference and in black for the
2255
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik