Seite - 2261 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2261 -
Text der Seite - 2261 -
Table 3: Load cases HPP MKF
Load case QMur QMKF QExisting cratio,min cratio,min
left right left right
m³/s m³/s m³/s m³/s m³/s m³/s m³/s
1 140 40 100 1.827 2.073 0.054 0.031
2 111 11 100 1.810 1.961 0.005 0.046
3 61 11 50 1.820 2.071 0.059 0.013
4 40 40 0 1.944 2.033 0.028 0.054
Fig. 9: Streamlines for left-hand (top) and right-hand (bottom) turbine
configuration
4.1. OPTIMIZED GEOMETRY
The single-phase calculation shows a non-optimal orientation of the
supporting pillars in the inflow region of the power plant inlet for the left-hand
rotating turbine. In all tested load cases it shows, that the pillars should be rotated
by up to 15° counter clockwise. In addition, the analysis of the flow field in the
horizontal evaluation levels shows optimisation potential in the hydraulic design
of the existing wall between the MKF bay and the right bottom outlet.
The flow situation at the water surface shows that a dead water zone is to
be expected in the inlet area in the bay power plant on the orographic side (right).
A hydraulic optimisation (enlargement of the radius) of the right orographic
boundary in the inlet area of the MKF bay has been proposed in order to avoid
Plane 3
375.5 masl Plane 2
377.5 masl Plane 1
379.75 masl
= 1.83
= 0.054
= 2.07
= 0.031
Plane 3
375.5 masl Plane 2
377.5 masl Plane 1
379.75 masl
2261
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik