Seite - 2262 - in Book of Full Papers - Symposium Hydro Engineering
Bild der Seite - 2262 -
Text der Seite - 2262 -
this unfavourable flow situation together with a gravel step (see Fig 8d). A
stationary approach is used with the SST turbulence model, with the flow rate as
boundary condition at the MKF and the existing power plant, and furthermore a
pressure boundary condition was set at the inlet. The investigations now were all
carried out by means of two-phase CFD simulation. For the numerical modelling
of the flow with free water level for the project in question the "homogeneous
multiphase model" in Ansys CFX, the one based on a Volume of Fluid approach
(VOF), is used. For the multiphase studies the calculation area was extended
upwards (airspace) and very finely resolved with prismatic layers in the area of
the expected water level. This ensures, that the water level can be precisely
calculated during the CFD simulation. An optimised geometry proposal of the
hydraulic contour of the MKF bay was developed. Turning back the pillars and
the removal of the right bank embankment detected and included in the new
geometry model with 4.87 million nodes, respective 15.44 million elements. The
hydraulic contour of the existing wall between MKF bay and right to bottom outlet
was modified to achieve the desired effect of no detectable level reduction. The
water level is now constant along this wall as visualised in Fig. 10, whereby the
optimised contour is shown at the bottom left.
Fig. 10: Water level at wall, distribution of intake water
The last optimisation step deals with the installation of a baffle before the
spiral entry. This should attenuate the formation of the vortex structures on the
water surface or, in an ideal case, suppress it completely and lead to a further
homogenisation of the velocity distribution in front of the turbines. At the same
time, an extended partition before the spiral entry can be used as a support
structure for a pedestrian walkway in this area of the power plant.
However, Kaplan turbines with a concrete semi-spiral have an
asymmetrical quantity distribution due to the geometric conditions at the entrance
to the spiral. The water masses entering MKF bay through field 1 are shown in
green, those in field 2 in red and those in field 3 in black (Fig. 10 right bottom). An
approximate distribution of volumes between the fields at the entrance to the bay
shows the previously mentioned circumstance of an unequal collection of
quantities in a concrete semi-spiral (QField1 = 20%, QField2 = 30%, QField1 = 50%).
Q=20%
Q=30%
Q=50%
2262
Book of Full Papers
Symposium Hydro Engineering
- Titel
- Book of Full Papers
- Untertitel
- Symposium Hydro Engineering
- Autor
- Gerald Zenz
- Verlag
- Verlag der Technischen Universität Graz
- Ort
- Graz
- Datum
- 2018
- Sprache
- englisch
- Lizenz
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Abmessungen
- 20.9 x 29.6 cm
- Seiten
- 2724
- Schlagwörter
- Hydro, Engineering, Climate Changes
- Kategorien
- International
- Naturwissenschaften Physik
- Technik