Page - 990 - in Book of Full Papers - Symposium Hydro Engineering

Here the explanation about the process of dam safety license. In figure 4, dam safety license start with sending application from the dam owner to the Minister c.q. Director General of Water Resources as the chairman of Dam Safety Commission. The report about dam should be sent to DSU to have first assessment. After that, the DSC, DSU and dam owner inspect the dam site and discussed it. After inspection, the DSU reviewing the inspection result whether the reports are appropriate or not. If everything is going fine, then DSU, DSC, dam owner, consultant and/or contractor will take DSC technical meeting. In this meeting, it discussed about dam safety based on regulation, standard, guideline and manual in technical consideration. After the dam owner complete the suggestion at the technical meeting, then the process continue to plenum meeting. The DSC members who attend the plenum meeting vary from some other institution, such as environmental, electricity, and geological agency, which are related to dam safety. If all the process is finished, the DSC would give recommendation to the minister. Then the minister will issue the license of dam safety. The documents which are sent to dam safety unit in order to get dam safety license in every phase of dam development and management will be brief explained below. 990