Page - 1581 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1581 -
Text of the Page - 1581 -
analyses were performed for the end of construction stage using the elasto-plastic
Mohr-Coulomb model for material nonlinear behavior. Material properties of dam
body and foundation have been presented in Table 1. In order to absorb the
increments of stresses on the boundaries caused by dynamic loading, absorbent
boundaries has been used. For accurate representation of wave transmitted in the
model, the element sizes should be selected small enough to satisfy the following
criteria expressed by Kuhlemeyer & Lysmer [7]:
10
l
[1]
Fig. 2
. model of dam-foundation and its elements
where λ is the wave length associated with the highest frequency component that
contains appreciable energy and ∆l is the length of element. Considering to these
criteria, the element size have been selected as fine as possible.
Table 1
Material properties of the Mijaran earth dam
Type of material γ
(KN/m3) C
(KPa) φ E
(MPa) υ
Dam body 21.5 27 23 215 0.3
foundation 21.5 1 42 270 0.3
Drain material 20.5 1 42 345 0.25
It should be mentioned that shear modulus, G has been modified according
to effective mean stress (σ0) as
i
iGG
0
0
Small viscous damping is added for dam body. This damper was given by
Rayleigh damping: the damping factors were assumed 0.005 for the first and
second natural periods.
Earthquake response analyses were carried out for Manjil earthquake. The
acceleration time histories of the Manjil Earthquake as shown in Fig. 3, were
1581
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik