Page - 1694 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1694 -
Text of the Page - 1694 -
earthen embankment consists of compacted fill made of impervious silty clay and
clayey silts.
The embankment was constructed directly on the existing overburden after
topsoil was stripped. The alluvium is underlain by the flat lying Catheys, Cannon
and Hermitage formations, with the Hermitage being underlain by the non-
daylighting Carters and Lebanon formations (Fig. 2). The Cannon formation is
massive bedded, all other formations are thin bedded or medium to thin bedded.
The unconfined compressive strength of the rock was up to 220 MPa in the
Cannons with formation averages ranging between 50 and 190 MPa.
Physical evidence of karst is visible throughout the site including
disappearing streams, sinkholes, caves and extensive solution features. Bedding
planes and vertical fractures have the potential to form interconnected systems of
open features. These systems are especially threatening if they reach the
embankment, creating piping features in the soil rock interface and potentially
causing an erosion failure of the embankment.
3. PRIOR REMEDIATIONS
A grout curtain was installed during the original construction of the dam.
Later, after several potentially unsafe conditions were detected in the late 1970’s,
a further grout curtain was installed about 3 m downstream of the embankment
centerline through the embankment into the bedrock from 1982-1984. Finally, in
order to reduce seepage through the bedrock and in order to allow for a safe
Fig. 2 Geological profile in the wall alignment including areas of high grout
takes (upstream view)
1694
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik