Page - 1698 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1698 -
Text of the Page - 1698 -
5.2. PANEL BARRIER WALL
In their proposal, BFC followed the specifications [2] and proposed a hybrid
wall configuration (primary columns and secondary diaphragm wall panels). The
columns in the USACE plan were designed to provide additional wall thickness at
the panel overlaps due to USACE concerns that the required vertical and
rotational accuracies would be difficult to achieve at more than 90 m depth.
However, based on the ability of the BAUER hydrocutter to excavate the hard
rock and maintain excellent verticality as demonstrated at the panel encasement
wall, BFC made a value engineering cost proposal (VECP) to eliminate the
columns (red circles in Fig. 5) without increasing the nominal overlap between
the barrier wall panels. The government accepted the VECP.
The barrier wall was excavated through the encasement wall concrete into
the foundation rock to depths between 44 m and 93 m using two BAUER
Hydrocutter. Water was used as trench support and transport fluid. Concrete was
again placed using two tremie pipes. Cores and borehole images showed that
the use of water as fluid in conjunction with a rigorous joint cleaning procedure
allowed for an excellent bond between the primary and secondary panels.
6. TIE-IN CONNECTION TO THE CONCRETE DAM
6.3. TASK TO CONNECT TO THE CONCRETE DAM
Specified was to construct a positive, continuous, full height, water-tight,
connection between the encasement/barrier wall and the concrete dam [2]. The
tie-in had to accommodate the sloping surface of the concrete monoliths
providing a seal along the monolith to prevent floodwaters from circumventing the
joint seal with the monolith. A minimum embedment of six (6) inches and a
maximum embedment not exceeding four (4) feet had to be met.
Fig. 5 Hybrid wall as specified
1698
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik