Page - 1704 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1704 -
Text of the Page - 1704 -
COMMISSION INTERNATIONALE
DES GRANDS BARRAGES
-------
VINGT-SIXIÈME CONGRÈS DES
GRANDS BARRAGES
Autriche, juillet 2018
-------
REMEDIAL GROUTING FOR EMBANKMENT DAM CORE SEALING – 10
YEARS EXPERIENCES
DongSoon PARK1, and Hee-Dae LIM2
1Principal Researcher, K-water Convergence Institute, K-WATER
2Professor, Department of Civil Engineering, CHUNGNAM UNIVERITY
REPUBLIC OF KOREA
1. INTRODUCTION
To address problematic seepage from existing dams, a grouting method can
be applied to the deteriorated core layers without reducing the reservoir’s water
level. Remediation grouting for sealing of aging embankment dam cores has been
known as effective, however, no standardization is at present and publication of
case histories are rare. Applying remediation grouting directly to the embankment
is technically challenging. For remediation grouting of dam core layers, the main
purpose should be the improvement of core impermeability. Therefore, it is not
desirable to use pressure-type grouting methods such as jet grouting, vibro-type
compaction grouting, rock-mass pressure grouting, etc.
For remedial grouting of embankment dam cores, a different design concept
is required comparing to typical dam foundation or coffer dam grouting. It should
satisfy the opposite conditions, which are the prevention of hydraulic fracturing as
well as the maximization of filling of voids and deteriorated areas [1-3].
In this paper, low pressure remediation grouting techniques applied for two
large dams over past 10 years are analyzed in detail. More extended case histories
can be referred to the reference authored by Park and Oh [4].
Both dams in this study are central core-type fill dams. Technical descriptions
of each dam’s seepage-related problems are provided. In practice, the deteriorated
areas of the clay core layers are not uniformly distributed; rather, the deteriorated
areas are randomly distributed, which complicates grouting designs and requires
flexibility in the application of the grouting technique. Therefore, the grouting
1704
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik