Page - 1707 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1707 -
Text of the Page - 1707 -
AG dam also showed distinct symptoms of core deterioration after first
impoundment. The dam embankment’s earthfill had very low stiffness and the core
material contained a relatively large proportion of sandy soil with fine-grained soils.
Various areas of wet zones were found on the downstream surface and general
grouting was performed four times. After common grouting applications, heavy
rainfall in 2003 induced significant downstream slope-sliding (Fig. 3). After
implementing immediate emergency measures to rehabilitate the slope,
permanent remediation was undertaken with low-pressure permeation grouting.
Fig. 3
AG dam incident: downstream slope-sliding (2003)
3. REMEDIAL GROUTING
WM and AG dams exhibited distinct incidents such as sinkholes, slope-
sliding, excessive seepage, etc. The common feature among all dams was the
degraded impermeability of their core layers, and the degrees of deterioration were
largely inhomogeneous and anisotropic. Therefore, site-specific remediation
grouting designs and applications were essential. Initial remedial grouting design
conditions were carefully arranged according to the pilot grouting test results.
Additional findings obtained through additional trial tests were applied to correct
the initial grouting design conditions. Specific criteria for maximum fluid pressure,
grouting duration, and refusal were determined to prevent hydraulic fracturing and
grout penetration into filter layers.
Table 2 and Fig. 4 show a typical procedure and a sequence of remedial
permeation grouting, respectively. Two rows of grouting holes were spaced 2 m
from each other in the dam axis direction and 1 m from each other in the stream
direction. The grouting sequence was conducted by interpolation with each
incremental grouting spaced at least 8 m from the preceding one. For the remedial
grouting of AG dam, three rows of grouting holes were partially drilled, considering
a relatively higher degree of core deterioration.
1707
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik