Page - 1722 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1722 -
Text of the Page - 1722 -
It could be seen that by increasing the river bank slope, internal erosion in
the horizontal sandy layer has been decreased. The reason might be explained
that when the water level in the reservoir rises, the seepage flow through a sample
has been increased and it causes growth in discharge and erosion in the layer.
Since the sand particles are uniform and don't have any cohesiveness, the sandy
layer is washed out through a seepage flow by passing the time. However, when
the river bank slope increases, there is more amount of load from the river bank;
so, the force doesn’t allow to have more undermining. As it can be seen in figure 6,
similar trends are observed for steep layers. Figures 5 and 6 show examples of
the bank slope effect on the hydraulic gradient over time. Hydraulic gradient
calculated by dividing the difference between water levels and the sample length.
Fig. 5
Changes of the hydraulic gradient and t* in gradation range of 1.2-2.0 mm for
horizontal layers
Fig. 6
Changes of the hydraulic gradient and t* in gradation range of 1.2-2.0 mm for
steep layers
Comparison of the hydraulic gradients for different bank slopes, at the same
time, shows that by increasing the bank slope, hydraulic gradient is decreased. As
mentioned in the previous section, when the bank slope is increased, internal
erosion length is decreased; Therefore, according to hydraulic gradient formula,
by reducing the internal erosion length, the hydraulic gradient is diminished. The
outcomes of the experiments display that the hydraulic gradient for three bank
slopes has an increasing trend over time. The reason is attributed to the higher
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 0.2 0.4 0.6 0.8 1 1.2
i
t* Slope 1:1
Slope 1.5:1
Slope 2:1
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 0.2 0.4 0.6 0.8 1
i
t* Slope 1:1
Slope 1.5:1
Slope 2:1
1722
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik