Page - 1756 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1756 -
Text of the Page - 1756 -
Table 3. Geotextile Specifications used in the Dam Body and Perimeter Dykes
Standard
Geotextile Type
Parameter
500 gr
700 gr
ASTM D5261
≥500gr
≥700gr
Weight per square meter
ASTM D4632
KN
1.64
≤
≤KN
1.33
KN
2.00
≤
≤KN
1.46
Tensile Strength
ASTM D4632
≥50%
≥50%
Elongation
ASTM D533
KN
0.64
≤
≤KN
0.51
KN
0.89
≤
≤KN
0.46
Resistance against Rupture
ASTM D833
KN
0.64
≤
≤KN
0.51
KN
0.89
≤
≤KN
0.46
Resistance against puncture
E) Upper Protective Finish Layer: The upper protective layer on top of the Geotextile layer consists
of a 10cm-thick plain concrete layer with a compressive strength of 16 MPa containing Polymer
Acrylic additive. This layer was placed from Elevation 1266m to 1268.5m and underneath the
riprap and Mallon work. The details of this protective layer are shown in Figure 6. This detail
was kept for the entire architectural features and includes a 5cm concrete layer with Polymer
additives.
F) Dam Crest and dyke Details at connection point to the upstream protective layer: At the upstream
edge of dam and dyke crest, the impervious Geomembrane is placed and supported in a trench.
The crest along dam’s width is covered by appropriate finishing layer. In order to protect the
accessible surface of the upstream face, a 10cm thick shotcrete layer is placed covered by riprap
and crushed rock. This protective layer extends to the crest level and is fixed within the walkway
concrete.
G) Connection Details of the upstream face of dam and dyke to the reservoir impervious layer: The
Geomembrane layer is present both at the bed of reservoir and underneath the upstream face of
the earth fill dam; however their sub-layer details are different. A concrete bump (hunched
concrete zone) was used at the connection point of the Geomembrane as shown in Figure 6. The
concrete bump is 1.5m-wide plain concrete with a compressive strength of 16 MPa.
At Dam’s Bottom Upstream End
At Dam’s Top Upstream End
Figure 6. End-Details of the Water tightening Membrane
1756
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik