Page - 1764 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1764 -
Text of the Page - 1764 -
2. MATERIALS AND METHODS
Grout curtain was firstly used in United States to control seepage in rock
masses under and around dam structures in the 1890’s [8]. At the beginning, long
term behavior of many curtains has not been provided, especially in formations
including soluble or erodible materials. However, effective and durable grout
curtains have been formed since the mid-1970’s using a new design perspective
and considering different grout materials. Use of positive cut-offs such as slurry
trench and diaphragm wall increased after 1980 [9]. In the past decade, there have
significantly been advancements on grout curtain concepts and grouting industry.
Especially new developments on real-time monitoring of flow rate and pressure of
pumped grout result to more effective and durable grout curtains.
There are generally three separate techniques, which are used for forming
grout curtain in engineering sector. These are jet-grouting, high-mobility grouting,
and compaction grouting. In jet-grouting technique a cementitious material known
as grout is injected into poor rocks or soils with high velocity and high pressure to
form soilcete, which is composed of mixture of soil and grout materials. In high-
mobility technique the cementitious grout material is pressurized into the pores and
structural features of the underlying soil to form the grout and soil to binding. Its
performance is directly related with the size of the pores or void spaces of the
underlying soil material. This type of grouting provides an increase on strength
properties and a decrease on permeability. Compaction grouting is another
technique which use low viscosity grout to displace and densify loose soils. Its use
in dam site provides stabilization of large void spaces known as sinkholes. Some
scientists have explained these techniques more detail in their research [10]. All
three installation techniques mentioned above is commonly used to simply prevent
seepage from occurring under water retaining structures, especially for dams.
The depth of grout curtain is a critical issue for performance of dam
structures. It is clear that depth for primary holes are based on the geology and
permeability of foundation materials and also regional groundwater conditions. In
USBR standard, it can extend to a depth below the surface of the rock equal to
about 0.5 to 1.0 times the reservoir head, which lies above the surface of the rock
[7]. However, an empirical criterion is generally used as guideline which are based
on practice (D= 0.3333xH + C). In this formula D is depth of grout curtain, H is the
height of the dam (the final head of water) and C is a coefficient ranging from 7.5
to 22.5 in m. The Indian Standard [11] introduced guidelines for the design of
grout curtain as similar of USBR formula (D= 0.667xH + 8). In this empirical
formula D and H are the depth of curtain and the head of the reservoir of water
given in m, respectively. In Switzerland it is observed that the average of the depth
of the curtains grout is stated as 66.7 percent of height of the dam [12] In Sweden,
specified deep of grout curtain was depended to the head of the reservoir water at
the dam. If height of dam is less than 30 m, the depth of curtain can be selected
between 20-30 m. However, its height is greater than 30 m it can be taken between
one-third ad two-third of the head of water in reservoir [13]. In Turkey dam
engineers consider the simple USBR formula for designing the grout curtains of
dams.
1764
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik