Page - 1790 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1790 -
Text of the Page - 1790 -
3. MAIN DESIGN OF DAM WATERPROOFING SYSTEM
According to the contract drawings, waterproofing of the dam should be
done by a 60 cm-thick reinforced concrete layer. This layer should be
implemented after completion of dam body to lessen the tensions on concrete
layer induced by settlement. The concrete impervious layer was to start from
plinth concrete at the bottom part to the top as shown in Fig. 2:
Fig. 2
Dam Section in Spillway
4. GEOMEMBRANE IMPERVIOUS SYSTEM DESCRIPTION
On the one hand, concrete impervious layer of main design should be
implemented after the completion of dam body, which increases the time of
project and on the other hand, geomembrane is technically more flexible than
concrete and eliminates concerns about concrete cracking. For this purpose, a
work group named Kahir Dam Waterproofing Design Review Team was formed
and after lots of technical meetings, the impervious layer was changed to
geomembrane. Eventually, geomembrane waterproofing system was designed
as mentioned below (Fig. 3 & 4):
ď‚· Expose part from elevation +16 to +42 (bottom outlet level) which is
always under water after first impounding. Using geocomposite
including a 3 mm PVC geomembrane and 500 gr/m2 geotextile attached
together. Moreover, a 1000 gr/m2 geotextile over it as a protective layer.
ď‚· Covered part with precast concrete panels over geocomposite from
elevation +45 to +50. Similar to expose part, geocomposite have been
1790
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik