Page - 1791 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1791 -
Text of the Page - 1791 -
used with 1000 gr/m2 geotextile over it to protect from probable
damages of precast panels placed later on. However, extra 500 gr/m2
geotextile layer used under the geocomposite in order to prevent
puncturing.
ď‚· Winchester part (geocomposite attached to precast concrete panels)
[2]. The impervious element of this part is a 2.5 mm geomembrane and
200 gr/m2 geotextile attached to concrete panels.
ď‚· At the end, after implementation of all geocomposites, the two berms in
elevations +42 and +50 are filled with concrete. These two berms have
been designed to support the harness system of cover segments.
Fig. 3
Geomembrane Impervious System
In items below, the design details and construction method of each part are
explained:
4.1. ELEVATION +16 TO +42
After first impounding, up to level +42 is always immersed; therefore, there
is no need to have a permanent protection layer over geomembrane.
Geomembrane is attached to the plinth concrete in lower parts and vertically to
the dam body in every 6 m intervals as well. Plinth concrete is waterproof itself
and geomembrane is fastened to plinth concrete by batten strips. There are two
drainage pipes in each 12 m of upstream face to collect the probable leakage
and lead it to the drainage gallery. The drainage system is designed in a way that
the leakage of every 12 m is separately discharged into the gallery.
4.2. ELEVATION +45 TO +50
This part of dam body is above the lower bottom outlet. Since this elevation
may sometimes be above water level, the geocomposite needs to be protected. It
was supposed to perform Winchester method to seal this part like as upper
levels; however due to the time-consuming procurement process, dam body
construction reached to this level and the sealing system was inevitably changed
to concrete-panel covered geocomposite (CPCG). In this method, without any
1791
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik