Page - 1793 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1793 -
Text of the Page - 1793 -
5. IMPERVIOUS SYSTEM DESIGN
As previously mentioned, Kahir dam waterproofing system is specific.
Additional to the design of conventional elements -like as stability of exposed
geomembrane against uplift induced by wind [5] and stability of Winchester
panels and connection anchors- stability analysis of the middle part cover
segments, harness system including harness rebars and reinforced concrete
berms have been performed. High seismic risk of the region was of great
concern. Design loads were considered as below (Fig. 5):
 Weight of concrete cover segments
 Hydrostatic and hydrodynamic loads
 Inertial loads activated by seismic acceleration
 Inertial impact of dam body on concrete cover
 Wind uplift
Although design of different elements has basically been done, the results
have been compared to main references; e.g. the number of anchors per unit
surface has been calculated less than common construction experiences;
therefore the number of steel anchor area has been replaced by the typical
quantity mentioned by E. K. Schrader [6].
Fig. 5
Schematic Design Loads
Upper and lower harness concrete blocks have been modeled in ANSYS
with 4-node plane elements (PLANE42). Some schematic diagrams of this
analysis have been shown in Fig. 6.
1793
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik