Page - 1843 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1843 -
Text of the Page - 1843 -
since it is more economical. As argued by Fell et al (2005) grout holes should
always be oriented and or inclined so as to intercept the major fractures in the
rocks and as many discontinues in the rock foundation. The Employer
Requirements for Isimba HPP further specified that check holes should be inclined
too, to assess the effectiveness of the grouting works.
After the drilling of the boreholes, they are washed to remove any cuttings that may
have clogged the rock fractures around the sides of the hole. The borehole is then
water pressure tested to establish the rock mass permeability prior to grouting.
Pressure testing is a method of testing the permeability of rock mass using water
or grout pumped down hole under pressure. The water pressure test is carried out
using pressure testing equipment, water and a packer. A packer—in grouting, is a
device inserted into a hole in which grout or water is to be injected which acts to
prevent return of the grout or water around the injection pipe. It is usually an
expandable device actuated mechanically, hydraulically, or pneumatically. The
results from the water pressure testing are indicated by a lugeon value. Lugeon is
a measure of permeability defined by a pump-in test or pressure test, where one
Lugeon unit is a water take of 1 L/min per meter of hole at a pressure of 10 bars.
This implies that the rock permeability is that in one minute, one litre of water, will
flow across a unit (1 metre) section of the rock, under a pressure load of 10 bars.
These water pressure test results for the pressure testing prior to grouting are also
recorded and submitted as part of the grouting records/ reports. Records of the
drilling, grouting and water pressure tests, pressures, flow rates, the quantities
1843
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik