Page - 1875 - in Book of Full Papers - Symposium Hydro Engineering
Image of the Page - 1875 -
Text of the Page - 1875 -
slabs and the cut-off wall. In consideration of the laboratory test results particularly
the deformation behaviour of the cut-off wall was of major interest. Hence, also
observation points were accumulated there and where monitoring instruments
were placed.
Thanks to the fact that construction already started when the models were
prepared, calibration works could consider the actual construction stages and
measurement results derived from inclinometers, settlement gauges and cells.
This is a comfortable situation, which contributed to the reliability of the model. The
stress-strain model was used mainly to investigate the dam conditions at the end
of construction and the first impoundment stage. The deformation at the face slab
and the plinth area as well as the stress conditions along the cut-off wall were of
major interest.
Fig. 4
FE mesh and model for the stress-strain analysis
The model considered 34 construction stages at the main dam before the
impoundment was modeled by introducing the corresponding pore water pressures
manually. The results of the steady state seepage analysis were considered. Table
2 includes the considered parameters for the stress-strain analysis.
1875
Book of Full Papers
Symposium Hydro Engineering
- Title
- Book of Full Papers
- Subtitle
- Symposium Hydro Engineering
- Author
- Gerald Zenz
- Publisher
- Verlag der Technischen Universität Graz
- Location
- Graz
- Date
- 2018
- Language
- English
- License
- CC BY-NC-ND 4.0
- ISBN
- 978-3-85125-620-8
- Size
- 20.9 x 29.6 cm
- Pages
- 2724
- Keywords
- Hydro, Engineering, Climate Changes
- Categories
- International
- Naturwissenschaften Physik
- Technik